Laser Scribing
Xop Glass can perform patterning services by means of laser scribing technique. Lines, circles or any other figures can be drawn on the conductive side of the FTO glass to perform your device design.
Specifications:
[Pilkington
TEC Glass] [Nippon Sheet
Glass]
Pattern lines can have different thicknesses as shown in the image. Thinnest line is around 0.120 mm thick. Resistance achieved at both sides of the lines are higher than 10 MΩ, even after sintering at 450 °C.
Laser Scribing orders are performed by email, since
you should provide the design you wish for your plate, so please do not
use our online shop, Contact us to
proceed.